3. Working cautions
• Wear proper service attire when performing work.
Do not
wear loose clothing as they could get caught
on machine components.
• Wear the proper protective equipment when
working around the machine. For example helmet,
eye protector and protective shoes.
• Do not work around the machine if you are tired or
have consumed alcohol or drugs.
• Keep the machine away from obstacles and
hazardous materials.
• Ensure
the working environment is properly
ventilated.
• Do not allow third parties to come near the
machine.
• Make sure you have the support of the 3 points with
both hands
holding the handle and one foot at the
step when getting on and off the machine.
• When working under the machine, make sure the
machine does not move back and forth or side-to-
side.
• When working under the machine, provide secure
support for the machine.
• When using a hydraulic jack, always use with a
rigid rack to prevent the machine from falling.
4. Starting machine safely
• Do not do the following work when starting the
engine.
– Short across starter terminals.
–
Bypass the safety start switch.
• Make sure there are no bystanders or obstacles
present around the machine before starting the
engine.
• Do not start the engine unless the operator is
seated in the operator's seat.
• Make sure that the pilot levers are in neutral before
starting the engine.
1. SAFETY
SAFETY FIRST
3. Working cautions
05-E4B SERIES,05-E4BG SERIES
To Next Page
Loading...
Need help?
General