EasyManuals Logo

Kubota WSM 05-E4B Series User Manual

Kubota WSM 05-E4B Series
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
Oil
used in the engine should have API classification and proper SAE engine oil viscosity according to the ambient
temperatures where the engine is operated.
With
strict emission control regulations now in effect, the CF-4 and CG-4 engine oils have been developed for use
with low sulfur fuels, for on-highway vehicle engines. When a non-road engine runs on high sulfur fuel, it is
advisable to use a CF or better classification engine oil with a high total base number (a minimum TBN of 10 is
recommended).
Fuel
CAUTION
When changing or inspecting, be sure to level and stop the engine.
Cetane
rating: the minimum recommended fuel cetane rating is 45. A cetane rating greater than 50 is preferred,
especially for ambient temperatures below -20 (-4 ) or elevations above 1500 m (5000 ft).
Diesel fuel specification type and sulfur content % (ppm) used, must be compliant with all applicable emission
regulations for the area in which the engine is operated.
Use of diesel fuel with sulfur content less than 0.10 % (1000 ppm) is strongly recommended.
If high-sulfur fuel (sulfur content 0.50 % (5000 ppm) to 1.0 % (10000 ppm)) is used as a diesel fuel, change the
engine oil and oil filter at shorter intervals. (approximately half)
Do not use fuels that have sulfur content greater than 1.0 % (10000 ppm).
Diesel fuels specified to EN 590 or ASTM D975 are recommended.
No. 2-D is a distillate fuel of lower volatility for engines in industrial and heavy mobile service. (SAE J313 JUN87)
Since Kubota diesel engines of less than 56 kW (75 hp) utilize EPA tier 4 and interim tier 4 standards, the use of
low sulfur fuel or ultra low sulfur fuel is mandatory for these engines, when operated in US EPA regulated areas.
Therefore, please use No. 2-D S500 or S15 diesel fuel as an alternative to No. 2-D, and use No. 1-D S500 or S15
diesel fuel as an alternative to No. 1-D for ambient temperatures below -10 (14 ).
SAE:
Society of automotive engineers
EN:
European norm
ASTM:
American society of testing and materials
US EPA:
United states environmental protection agency
No. 1-D or No. 2-D, S500:
Low sulfur diesel (LSD) less than 500 ppm or 0.05 wt.%
No. 1-D or No. 2-D, S15:
Ultra low sulfur diesel (ULSD) 15 ppm or 0.0015 wt.%
3. MAINTENANCE
05-E4B SERIES,05-E4BG SERIES
3-3
KiSC issued 03, 2023 A

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota WSM 05-E4B Series and is the answer not in the manual?

Kubota WSM 05-E4B Series Specifications

General IconGeneral
BrandKubota
ModelWSM 05-E4B Series
CategoryEngine
LanguageEnglish

Related product manuals