2KL/2KK
1-3-65
1-3-2 Management mode
In addition to a maintenance function for service, the machine is equipped with a management function which can be oper-
ated by users (mainly by the administrator). In this management mode, settings such as default settings can be changed.
(1) Using the management mode
• Executing a department management item • Executing a default setting item
Press both of the density
adjustment keys and logout key
for 3 s.
Select an item using the zoom
+/– keys.
Press the OK key.
Execute the job accounting
(page 1-3-66).
Select “00” and
press the OK key.
Start
Press both of the density
adjustment keys, paper selection
key, 2-sided key, margin key,
border erase key or combine key
for 3 s.
Select an item using the zoom
+/– keys.
Press the OK key.
Execute the default
setting item (page 1-3-66).
Select “00” and
press the OK key.
Start
End
To Next Page
Loading...
