2KL/2KK
1-3-44
U245
Checking messages
Description
Displays a list of messages on the operation panel.
Purpose
To check the messages to be displayed.
Method
1. Press the start key.
2. Select the item to be displayed.
3. Displays the message one by one using zoom +/- keys.
When a message number is entered with the numeric keys and then the start key is pressed, the mes-
sage corresponding the specified number is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U250
Setting the maintenance cycle
Description
Displays and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
3. Change the setting using the numeric or zoom +/- keys.
4. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U251
Checking/clearing the maintenance count
Description
Displays, clears and changes the maintenance count.
Purpose
To check the maintenance count. Also to clear the count during maintenance service.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Clearing
1. Light exp. 3.
2. Press the start key. The count is cleared.
Setting
1. Change the count using the numeric or zoom +/- keys.
2. Press the start key. The count is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Exposure indicator Description Setting range Initial setting
Exp. 1 First 3 digits 000 to 999 150
Exp. 2 Last 3 digits 000 to 999 000
Exposure indicator Description Setting range Initial setting
Exp. 1 First 3 digits 000 to 999 000
Exp. 2 Last 3 digits 000 to 999 000
Exp. 3 Clearing the count - -
To Next Page
Loading...
