2KL/2KK
1-3-23
U070
Adjusting the DP magnification
Description
Adjusts the DP original scanning speed.
Purpose
Make the adjustment if the magnification is incorrect in the auxiliary scanning direction when the optional DP
is used.
Adjustment
1. Press the start key.
2. Select the item using the exposure adjustment keys.
3. Press the interrupt key.
4. Place an original on the DP and press the start key to make a test copy.
5. Change the setting value using the zoom +/- keys.
For copy example 1, increase the value.
For copy example 2, decrease the value.
Figure 1-3-11
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting
range
Initial
setting
Change in
value per step
Exp. 1 Magnification in the auxiliary scan-
ning direction (first page)
-25 to 25 0 0.2 mm
Exp. 2 Magnification in the auxiliary scan-
ning direction (second page)
-25 to 25 0 0.2 mm
Original Copy
example 1
Copy
example 2
U070
U071
(P.1-3-24)
U404
(P.1-3-52)
To Next Page
Loading...
