2KL/2KK
1-3-36
U110
Checking the drum count
Description
Displays the drum counts for checking.
Purpose
To check the drum status.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U130
Initial setting for the developing unit
Description
Replenishes toner to the developing unit to a certain level from the toner container that has been installed.
Purpose
To operate when installing the machine or replacing the developing unit.
Method
1. Press the start key. "on" appears.
2. Press the start key.
Installation of toner starts and "10" is indicated in the copy quantity display. Each time one minute
elapses, the indicated value decrements. When the installation is complete, "Gd" will be displayed if the
installation is successful or "nG" will be displayed if it has failed.
3. To stop the installation in the middle, press the stop/clear key.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Exposure indicator Description Setting range Initial setting
Exp. 1 First 3 digits 000 to 999 000
Exp. 2 Last 3 digits 000 to 999 000
To Next Page
Loading...
