Kyocera TASKalfa 220 - Checking;Clearing the Developing Drive Time; Checking the Developing Count

2KL/2KK
1-3-38
U157
Checking/clearing the developing drive time
Description
Displays the developing drive time for checking, clearing or changing a figure.
Purpose
To check the developing drive time after replacing the developer unit.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Clearing
1. Light exp. 3.
2. Press the start key. The drive time is cleared.
Setting
1. Change the drive time using the numeric or zoom +/- keys.
2. Press the start key. The drive time is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U158
Checking the developing count
Description
Displays the developing count.
Purpose
To check the developing count.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Exposure indicator Description Setting range Initial setting
Exp. 1 First 3 digits 000 to 999 000
Exp. 2 Last 3 digits 000 to 999 000
Exp. 3 Clearing the drive time - -
Exposure indicator Description Setting range Initial setting
Exp. 1 First 3 digits 000 to 999 000
Exp. 2 Last 3 digits 000 to 999 000