2KL/2KK
1-3-37
U144
Setting toner loading operation
Description
Sets toner loading operation after completion of copying.
Purpose
To set whether or not toner is loaded on the drum after low density copying. Normally no change is necessary
from the initial setting.
Setting
1. Press the start key.
2. Select the item.
3. Change the setting using the zoom +/- keys.
4. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U150
Checking sensors for toner
Description
Displays the on-off status of sensor related to toner.
Purpose
To check if the sensor operate correctly.
Method
1. Press the start key.
2. Turn sensor on and off manually to check the status.
When the on-status of a sensor is detected, that sensor is displayed in reverse.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Exposure indicator Description Setting range Initial setting
Exp. 1 Toner loading operation 1 (ON) / 0(OFF) 0
Exp. 2 Number of pages set 1 to 50 5
Exp. 3 Printing ratio 10 to 40 30
Original size indicator Sensor
A4/Letter-R Toner container sensor (TCS)
To Next Page
Loading...
