Kyocera TASKalfa 220 - Checking the Operation of the DP Motors; Checking the DP Switches

2KL/2KK
1-3-43
U243
Checking the operation of the DP motors
Description
Turns the motors or solenoids in the optional DP on.
Purpose
To check the operation of the DP motors or solenoids.
Method
1. Press the start key.
2. Select the motor or solenoid to be operated using the exposure adjustment keys.
3. Press the start key. The operation starts.
4. To turn each motor off, press the stop/clear key.
Completion
Press the stop/clear key when operation stops. The screen for selecting a maintenance item No. is displayed.
U244
Checking the DP switches
Description
Displays the status of the respective switches in the DP.
Purpose
To check if respective switches in the DP operate correctly.
Method
1. Press the start key.
2. Turn each switch on and off manually to check the status. When the on-status of a switch is detected,
the LEDs on the operation panel corresponding to the operated switch lights.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Exposure indicator Display Motor
Exp. 1 F-0 Original feed motor (OFM)
Exp. 2 C-0 Original conveying motor (OCM)
Exp. 3 r-0 Original switchback motor (OSBM)
Exp. 4 b-S Switchback feedshift solenoid (SBFSSOL)
Exp. 5 P-S Switchback pressure solenoid (SBPSOL)
LEDs Switch
Auto Exp. Original set switch (OSSW)
Text & Photo DP timing switch (DPTSW)
Photo Original detection switch (ODSW)
Text DP original cover switch (DPOCSW)
EcoPrint Original switchback switch (OSBSW)
Program Original size length switch (OSLSW)