Kyocera TASKalfa 220 - Periodic Maintenance Procedures

2KL/2KK-3
2-4-2
Periodic maintenance procedures
Section
Maintenance
part/location
User call 150K Points and cautions Page
Test copy
and test print
Perform at the maxi-
mum copy size
Test copy Test copy
Section
Maintenance
part/location
User call 150K Points and cautions Page
Paper feed
section
Paper feed pulley Check
Replace
- Clean it with alcohol if it is dirty.
Replace it if any problem such as flawed or
worn state is found.
P. 1-5-6
Separation pulley Check
Replace
- Clean it with alcohol if it is dirty.
Replace it if any problem such as flawed or
worn state is found.
P. 1-5-3
Forwarding pulley Check
Replace
- Clean it with alcohol if it is dirty.
Replace it if any problem such as flawed or
worn state is found.
P. 1-5-6
MP paper feed pulley Check
Replace
Clean Clean it with alcohol if it is dirty.
Replace it if any problem such as flawed or
worn state is found.
P. 1-5-11
MP separation pad Check
Replace
- Clean it with alcohol if it is dirty.
Replace it if any problem such as flawed or
worn state is found.
P. 1-5-11
Left registration roller Check
Replace
Clean Clean with alcohol or a dry cloth.
Replace it if any problem such as flawed or
worn state is found.
P.1-5-14
Right registration roller Check
Clean
Clean Clean with alcohol or a dry cloth. P.1-5-15
Right registration
cleaner
Check
Replace
Clean Replace it if any problem such as flawed or
worn state is found.
Vacuum.
Cam Check
Replace
Grease
Apply grease EM-50LP if paper feed from the
MP tray is 100K or more.