2KL/2KK-1
1-3-47
U277
Setting auto application change time
Description
Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Change the setting using the zoom +/- keys.
The setting can be changed by 30 s per step.
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U285
Setting service status page
Description
Determines displaying the digital dot coverage report on reporting.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select "on" or "oFF" using the zoom +/- keys.
Initial setting: on
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U286
Setting the optional language
Description
Assign an optional language to add to the user language options.
Purpose
Perform this step to add an optional language.
Method
Press the start key.
Setting
1. Change the setting using the zoom +/- keys.
Initial setting: 0
2. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
Description Setting range Initial setting
Switching time 30 to 270 (s) 30
Display Description
on Displays the digital dot coverage
oFF Not to display the digital dot coverage
Setting Description Setting Description
0 No selection 7 Finnish
1 Dutch 8 Portuguese
2 Turkish 9 Czech
3 Polish 10 Hungarian
4 Norwegian 11 Greek
5 Swedish 12 Lithuanian
6 Danish 13 Hebrew
To Next Page
Loading...
