2KL/2KK
1-3-60
U927
Clearing the all copy counts and machine life counts (one time only)
Description
Resets all of the counts back to 0.
Purpose
To start the counters with value 0 when installing the machine.
Supplement
The total account counter and the machine life counter can be cleared only once if all count values are 1000
or less.
Method
1. Press the start key. If the counters have been already cleared or either of the total counter or the scan-
ner counter exceeds 1,000, this mode cannot be run and "nG" is displayed.
2. Select "on" using the zoom +/- keys.
3. Press the start key. The accounting counter is cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U928
Checking the machine life count
Description
Displays the machine life counts for checking a figure.
Purpose
To check machine status.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U931
Setting the automatic toner install
Description
Sets automatic toner installation on or off when power is turned on.
Purpose
Changed to off when deactivating automatic toner installation.
Setting
1. Press the start key.
2. Select ON or OFF using the zoom +/- keys.
Initial setting: ON
3. Press the start key. The setting is set.
4. The machine automatically returns to the same status as when the power is turned on.
Maintenance
item No.
Description
Display Operation
- - - Canceling the clearing
on Executing the clearing
Exposure indicator Description Setting range Initial setting
Exp. 1 First 3 digits 000 to 999 000
Exp. 2 Last 3 digits 000 to 999 000
Display Description
ON Automatic toner install function ON
OFF Automatic toner install function OFF
To Next Page
Loading...
