Kyocera TASKalfa 220 - Installing the Cassette Heater (Option)

2KL/2KK
1-2-16
1-2-4 Installing the cassette heater (option)
Installing the cassette heater requires the following component:
Cassette heater (P/N 302KK94470): for 220 to 240 V specifications only
Cassette heater (P/N 302KK94460): for 120 V specifications
One (1) M3 x 8 S tight screw (P/N 7BB700308H)
Procedure
1. Open the front cover.
2. Remove the screw and release three hooks
and then remove the front right cover.
3. Pull out the cassette.
Figure 1-2-22
Front right cover
Screw
Front right
cover
Hook
Hook
Hook