Kyocera TASKalfa 220 - Setting the Destination; Switching between Double and Single Counts

2KL/2KK
1-3-45
U252
Setting the destination
Description
Switches the operations and screens of the machine according to the destination.
Purpose
To return the destination setting to its default setting after initializing the backup RAM by running maintenance
item U020.
Setting
1. Press the start key.
2. Select the destination using the zoom +/- keys.
3. Press the start key. The setting is set.
4. The machine automatically returns to the same status as when the power is turned on.
Supplement
The specified initial settings are provided according to the destinations in the maintenance items below. To
change the initial settings in those items, be sure to run maintenance item U021 after changing the destina-
tion.
Initial setting according to the destinations
U253
Switching between double and single counts
Description
Switches the count system for the total counter and other counters.
Purpose
According to user (copy service provider) request, select if A3/Ledger paper is to be counted as one sheet
(single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the item using the zoom +/- keys.
Initial setting: -A3
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
Jpn Metric (Japan) specifications
Inc Inch (North America) specifications
EUP Metric (Europe) specifications
ASA Metric (Asia Pacific) specifications
Chn Chinese specifications
Maintenance
item No.
Title Japan Inch Europe Metric,
Asia Pacific, China
253 Switching between double and
single counts
Single Double Double
344 Setting the low-power mode ENERGY
STAR
ENERGY
STAR
GEEA
Display Description
Sin Single count for all size paper
-b4 Double count for B4 size or larger
-A3 Double count for A3/Ledger paper only
-Fo Double count for Folio/Legal size or larger