Kyocera TASKalfa 220 - Page 16

2KL/2KK
1-1-2
Charge erasing system...................Exposure by cleaning lamp
Fusing system.................................Heat roller
Heat source: Halogen heaters
Abnormally high temperature protection devices: thermostats
Main memory ..................................Standard: 32 MB
Maximum: 160 MB
Interface..........................................USB interface connector: 1 (USB Hi-speed)
Network interface: 1 (10 BASE-T/100 BASE-TX)
Resolution.......................................600 x 600 dpi
Operating environment ...................Temperature: 10 to 32.5
°C/50 to 90.5°F
Humidity: 15 to 80% RH
Altitude: 2500 m/8,202 ft maximum
Brightness: 1500 lux maximum
Dimensions .....................................568 (W) x 546 (D) x 502 (H) mm (main body only)
22
3/8" (W) x 21 1/2" (D) x 19 3/4" (H) (main body only)
Weight.............................................33 kg/72.8 lbs
Space required................................838 mm (W) x 546 (D) mm (using MP tray)
33" (W) x 21
1/2" (D) (using MP tray)
Power source..................................120 V AC, 60 Hz, 9.7 A
220 to 240 V AC, 50 Hz, 5.1 A
Options ...........................................Document processor, paper feeder, duplex unit, key counter, printer kit and expansion
memory
Duplex unit
Type ................................................Internal type
Paper weight...................................64 - 105 g/m
2
Paper type ......................................Plain, Recycled
Paper size.......................................A3, B4, A4, A4R, B5, B5R, A5R, Folio, Ledger, Legal, Letter, LetterR,
StatementR, Oficio II, 8K, 16K
Power source..................................Electrically connected to the machine.
Dimensions .....................................363 (W) x 54 (D) x 181 (H) mm
14
5/16" (W) x 2 1/8" (D) x 7 1/8" (H)
Weight.............................................0.5 kg or less / 1.1 lbs or less
NOTE: These specifications are subject to change without notice.