2MV
1-3-120
U425 Method: [Chart2]
1. Press the start key.
2. Select the item.
Method: [CCD]
1. Select the item to be set.
2. Select the item to be set.
3. Enters the value that is indicated on the back of the chart using the +/- keys or numeric keys.
4. Press the start key. The value is set.
Item No. Description
Display Description
CCD Entering the target values of the chart (P/N: 302FZ56990)
used for adjustment
DP Entering the measurement value of the chart (P/N:
302AC68243) used for adjustment
Display Description
N875 Setting the N875 patch for the original for adjustment
N475 Setting the N475 patch for the original for adjustment
N125 Setting the N125 patch for the original for adjustment
C Setting the cyan patch for the original for adjustment
M Setting the magenta patch for the original for adjustment
Y Setting the yellow patch for the original for adjustment
R Setting the red patch for the original for adjustment
G Setting the green patch for the original for adjustment
B Setting the blue patch for the original for adjustment
Adjust Original Setting the main and auxiliary scanning directions
Display Description Setting range
L Setting the L value 0.0 to 100.0
a Setting the a value -200.0 to 200.0
b Setting the b value -200.0 to 200.0
To Next Page
Loading...
