2MV
1-4-3
Code Contents Conditions
Jam
location*
0000 Initial jam The power is turned on when a sensor in the con-
veying system is on.
-
0100 Secondary paper feed
request time out
Secondary paper feed request given by the con-
troller is unreachable.
F
0101 Waiting for process package
to be ready
Process package won’t be ready.
-
0104 Waiting for conveying pack-
age to be ready
Conveying package won’t be ready.
-
0106 Paper feeding request for
duplex printing time out
Paper feeding request for duplex printing given by
the controller is unreachable.
F
0107 Waiting for fuser package to
be ready
Fuser package won’t be ready.
-
0110 Right cover 1 open The right cover 1 is opened during printing.
-
0111 Front cover open The front cover is opened during printing.
-
0112 Right cover 3 open The right cover 3 is opened during printing.
-
0120 Receiving a duplex paper
feeding request while paper
is empty
Paper feed request was received from the duplex
section despite the absence of paper in the duplex
section.
F
0121 Exceeding number of duplex
pages circulated
The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains.
F
0210 Right cover 2 open The right cover 2 is opened during printing.
-
0501 No paper feed from cassette
1
The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 1.
B
0502 No paper feed from cassette
2
Feed sensor 1 (FS1) does not turn on during paper
feed from cassette 2 (Retry 1 times).
C
0503 No paper feed from cassette
3
Feed sensor 2 (FS2) does not turn on during paper
feed from cassette 3 (Retry 1 times).
D
0504 No paper feed from cassette
4
PF feed sensor (PFFS) does not turn on during
paper feed from cassette 4 (Retry 1 times).
E
0508 No paper feed from duplex
section
The registration sensor (RS) does not turn on dur-
ing paper feed from the duplex section.
F
0509 No paper feed from MP tray The registration sensor (RS) does not turn on dur-
ing paper feed from the MP tray.
A
0511 Multiple sheets in cassette 1 The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 1.
F
0512 Multiple sheets in cassette 2 Feed sensor 1 (FS1) does not turn off during paper
feed from cassette 2.
G
0513 Multiple sheets in cassette 3 Feed sensor 2 (FS2) does not turn off during paper
feed from cassette 3.
G
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).
To Next Page
Loading...
