2KR/2KS
1-3-73
U250
Setting the maintenance cycle
Description
Changes preset values for maintenance cycle and automatic grayscale adjustment.
Purpose
Provides changing the time when the message to acknowledge to conduct maintenance and automatic gray-
scale adjustment is periodically displayed.
Setting
1. Press the start key. The current pre-set value is displayed.
*: The setting can be changed by 100 per step.
Clearing
1. Select the item to be cleared. To clear all items, select [ALL CLEAR].
2. Press the clear key.
3. Press the start key. The setting value is cleared.
Setting
1. Select the item to be changed.
2. Enter the setting value using the +/- or numeric keys.
3. Press the start key. The setting value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U251
Checking/clearing the maintenance count
Description
Displays and clears or changes the maintenance count and automatic grayscale adjustment count.
Purpose
To verify the maintenance counter count and automatic grayscale count. Also to clear the count during main-
tenance service.
Method
Press the start key. The maintenance count is displayed.
Clearing
1. Select the item to be cleared. To clear all items, select [ALL CLEAR].
2. Press the clear key.
3. Press the start key. The count is cleared.
Setting
1. Select the item to be changed.
2. Enter the count using the numeric keys.
3. Press the start key. The count is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting range
Maintenance Count A Preset values for maintenance cycle 0 to 9999999
COUNT GRAY
ADJUST*100
Preset values for automatic grayscale
adjustment
0 to 99900*
Display Description Setting range
Maintenance Count A Count value for maintenance cycle 0 to 9999999
COUNT GRAY ADJUST Automatic grayscale adjustment count 0 to 9999999
To Next Page
Loading...
