2KR/2KS
1-3-98
U905
Checking/clearing counts by optional devices
Description
Displays the counts of DP or finisher.
Purpose
To check the use of DP and finisher.
Method
1. Press the start key.
2. Select the device, the count of which is to be checked.
3. Press the start key. The count of the selected device is displayed.
DP
Document finisher/Built-in finisher
3000-sheet document finisher
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U906
Resetting partial operation control
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the cassettes or other sections, and the
related parts are serviced.
Method
1. Press the start key.
2. Press [Execute].
3. Press the start key to reset partial operation control.
4. Turn the main power switch off and on.
Maintenance
item No.
Description
Display Description
DP Counts of optional DP
FINISHER Counts of optional document finisher, built-in finisher or 3000-sheet
document finisher
Display Description
ADP No. of single-sided originals that has passed through the DP
RADP No. of double-sided originals that has passed through the DP
CONCURRENT No. of dual scan originals that has passed through the DP
Display Description
CP CNT No. of copies that has passed
STAPLE Frequency the stapler has been activated
Display Description
CP CNT No. of copies that has passed
STAPLE Frequency the stapler has been activated
PUNCH Frequency the punch has been activated
STACK Frequency the stacker has been activated
SADDLE Frequency the center holding has been activated
To Next Page
Loading...
