2KR/2KS
1-3-106
U989
HDD scandisk
Description
Restores data in the hard disk by scanning the disk.
Purpose
If power is turned off while accessing to the hard disk is performed, the control information in the hard disk
drive may be damaged. Use this mode to restore the data.
Method
1. Press the start key.
2. Press [EXECUTE].
3. Press the start key. When scanning of the disk is complete, the execution result is displayed.
4. Turn the main power switch off and on.
U990
Checking/clearing the time for the exposure lamp to light
Description
Displays, clears or changes the accumulated time for the CIS to light.
Purpose
To check duration of use of the CIS. Also to clear the accumulated time for the CIS after replacement.
Method
1. Press the start key.
The accumulated time of illumination for the CIS is displayed in minutes.
2. Clear the accumulated time using the +/- or numeric keys.
3. Press the start key. The time is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U991
Checking the scanner count
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
1. Press the start key.
Completion
Press the stop key. The screen for selecting a maintenance No. item is displayed.
Maintenance
item No.
Description
Display Description
COPY SCAN COUNT Scanner operation count for copying
FAX SCAN COUNT Scanner operation count for fax
OTHER SCAN COUNT Scanner operation count except for copying
To Next Page
Loading...
