Kyocera TASKalfa 420i - Border Erase Default; E-Mail Subject;Body; File Name Entry; Zoom

2KR/2KS
1-3-110
Zoom
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of Zoom.
2. Select the default zoom setting.
3. Press [OK].
File Name Entry
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of File Name
Entry.
2. Press [File Name] to enter the file name in not more
than 32 characters.
3. Press [OK].
4. Press [Date and Time] to add the date/time to the
job, or press [Job No.] to add the job number to the
job. The added information will be displayed in
Additional Info.
5. Press [OK].
E-mail Subject/Body
1. Press cursor down key, [Next] of Function Defaults,
cursor down key, and then [Change] of E-mail Sub-
ject/Body.
2. Press [Subject] to enter an E-mail subject not more
than 60 characters.
3. Press [OK].
4. Press [Body] to enter an E-mail Body not more than
500 characters.
5. Press [OK].
6. Check that the entries are correct and press [OK].
Border Erase Default
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of Border
Erase Default.
2. Press [+] or [-] for the Border and Gutter width to
erase.
You can use the number keypad to enter the num-
ber directly.
3. Press [OK].
Border Erase to Back Page
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of Border
Erase to Back Page.
2. Press [Same as Front Page] or [Do Not Erase].
3. Press [OK].
Margin Default
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of Margin
Default.
2. Use the [+] or [-] to enter the margin widths for Left/
Right and Top/Bottom(-0.75 - +0.75).
You can use the number keypad to enter the num-
ber directly.
3. Press [OK].
Auto Image Rotation
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of Auto Image
Rotation.
2. Select the default for [Off] or [On].
3. Press [OK].
EcoPrint
1. Press cursor down key, [Next] of Function Defaults,
cursor down key twice, and then [Change] of Eco-
Print.
2. Select [Off] or [On] for the default.
3. Press [OK].
PDF/TIFF/JPEG Image
1. Press cursor down key and [Next] of Function
Defaults. Press cursor down key twice and then
[Change] of PDF/TIFF/JPEG Image.
2. Select the default image quality from [1] (Low Qual-
ity) to [5] (High Quality).
3. Press [OK].
High Comp. PDF Image
1. Press cursor down key and [Next] of Function
Defaults. Press cursor down key twice and
[Change] of High Comp. PDF Image.
2. Select the default for [Compression Ratio Priority],
[Standard], or [Quality Priority].
3. Press [OK].
Color TIFF Compression Settings
1. Press cursor down key and [Next] of Function
Defaults. Press cursor down key twice and then
[Change] of Color TIFF Compression.
2. Select [TIFF V6] or [TTN2].
3. Press [OK].
Repeat Copying
1. Press cursor down key and [Next] of Function
Defaults. Press cursor down key twice and
[Change] of Repeat Copy.
2. Select the default for [Off] or [On].
3. Press [OK].
Collate/Offset
1. Press cursor down key, [Next] of Function Defaults,
cursor down key twice and then [Change] of Col-
late/Offset.
2. Select the defaults for Collate and Offset respec-
tively.
3. Press [OK].