Kyocera TASKalfa 420i - U237 Setting finisher stack quantity

2KR/2KS
1-3-61
U237
Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the Inner tray in 3000-sheet document fin-
isher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [MAIN TRAY]
1. Change the setting using the +/- or numeric keys.
Initial setting: 0
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Setting: [MIDDLE TRAY]
1. Change the setting using the +/- or numeric keys.
Initial setting: 0
Number of sheets of stack on the internal tray for non-staple copying: 10 sheets
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Maintenance
item No.
Description
Display Description
MAIN TRAY Number of sheets of stack on the main tray
MIDDLE TRAY Number of sheets of stack on the internal tray for staple copying
Display Description
0 Number of sheets of stack on the main tray: 3000 sheets
1 Number of sheets of stack on the main tray: 1500 sheets
Display Description
0 Number of sheets of stack on the internal tray for staple copying: 50 sheets
1 Number of sheets of stack on the internal tray for staple copying: 30 sheets