2KR/2KS-1
1-3-16
U000
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U001
Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
U002
Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport (position in which the frame can be fixed).
Method
1. Press the start key.
2. Press [MODE1(ALL)] on the touch panel.
3. Press the start key.
The mirror frame of the scanner returns to the position for transport.
4. Turn the main power switch off and on.
An error code is displayed in case of an initialization error. Refer to the table of the error codes on P.1-3-19.
When ERROR 09 occurred, turn main power switch off then on, format the hard disk using maintenance
item U024, and execute initialization using maintenance item U002. For other errors occurred, turn main
power switch off then on, and execute initialization using maintenance item U002.
Maintenance
item No.
Description
No. Description Supplement
(49) Fixed assets number
(50) Job complete judgment timeout time
setting for local interface
(51) Media type attributes
1 to 28 (Not used: 18, 19, 20)
Weight settings
0: Light/1: Normal 1 / 2: Normal 2 / 3: Normal 3/
4: Heavy 1 / 5: Heavy 2 / 6: Heavy 3 / 7: Extra Heavy
Fuser settings
0: High / 1: Middle / 2: Low / 3: Vellum
Duplex settings
0: Disable / 1: Enable
(52) RFID information
(53) RFID reader/writer version information
(54) Maintenance information
(55) Drum serial number Black/Cyan/Magenta/Yellow
To Next Page
Loading...
