2KR/2KS
1-3-24
U034
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U035
Setting the printing area for folio paper
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U037
Checking the operation of the fan motors
Description
Drives the fan motors.
Description
To check the operation of the fan motors.
Method
1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
U034
U067
(P.1-3-30)
U072
(P.1-3-36)
Display Setting Setting range Initial setting
LENGTH DATA Length 330 to 356 mm 330
WIDTH DATA Width 200 to 220 mm 210
Display Operation
Fixing Fan Fuser fan motor (FUFM) is turned on
Developing Fan Developing fan motor (DEVFM) is turned on
Controller Box Fan Controller fan motor (CONFM) is turned on
Internal Fan LSU fan motor (LSUFM) is turned on
Conveying Fan Paper conveying fan motor 1, 2, 3 (PCFM1, 2, 3) are turned on
Power Source Fan Power source fan motor 1, 2 (PSFM1, 2) are turned on
Triple Fan Duplex fan motor 1, 2, 3 (DUPFM1, 2, 3) are turned on
ISU Fan Scanner fan motor (SFM) is turned on
ALL All fan motor are turned on
To Next Page
Loading...
