2KR/2KS
1-3-55
U203
Checking DP operation
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the item to be operated.
*: Dual scan DP only.
4. Press the start key. The operation starts.
5. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting range Initial setting
CCD ADP
(NON P)
Without paper, single-sided original of CCD
(continuous operation)
--
CCD ADP With paper, single-sided original of CCD - -
CCD RADP
(NON P)
Without paper, double-sided original of CCD
(continuous operation)
--
CCD RADP With paper, double-sided original of CCD - -
CIS RADP
(NON P)*
Without paper, double-sided original of CIS
(continuous operation)
--
CIS RADP* With paper, double-sided original of CIS - -
SPEED
Switching between normal reading (600 dpi)
and high-speed reading
0 (Normal)/
1 (High-speed)
0
To Next Page
Loading...
