2KR/2KS-1
1-3-96
U901
Checking/clearing copy counts by paper feed locations
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable parts.
Method
1. Press the start key. The counts by paper feed locations are displayed.
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the counts to be cleared. CASETTE 3, CASETTE 4 and LCF cannot be cleared.
2. Select the counts for all and press [ALL CLEAR].
3. Press the start key. The counts is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U902
Checking/clearing the punch-hole scrap counter
Description
Sets the punch limit and displays and clears the punch-hole scrap count when 3000-sheet document finisher
is installed.
Purpose
Sets the punch limit to notify the user of the time to collect punch-hole scrap. Also, used to manually clear the
punch-hole scrap count if a message requiring collection of punch-hole scrap is shown on the touch panel
after collection. If punch-hole scrap is collected with the machine power turned off, the punch-hole scrap count
is not cleared and consequently this problem occurs.
Setting
1. Press the start key.
2. Select the item.
3. Change the value using the numeric keys.
The punch limit can be set in increments of 1000.
4. Press the start key. The value is set.
Clearing
1. Enter 0 using the numeric keys.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
MP TRAY MP tray
CASETTE 1 Cassette 1
CASETTE 2 Cassette 2
CASETTE 3 Cassette 3 (optional paper feeder)
CASETTE 4 Cassette 4 (optional paper feeder)
DUPLEX Duplex unit
LCF Optional 3000-sheet paper feeder
Display Description Setting range
PUNCH LIMIT (*1000) Punch limit (maximum number of punching times) 0 to 9999000
PUNCH WASTE
COUNT
Punch-hole scrap count (current number of punch-
ing times)
0 to 9999999
To Next Page
Loading...
