2KR/2KS
1-3-40
U089
Outputting a MIP-PG pattern
Description
Selects and outputs the MIP-PG pattern created in the machine.
Purpose
To check copier status other than scanner when adjusting image printing, using MIP-PG pattern output (with-
out scanning).
Method
1. Press the start key.
2. Select the MIP-PG pattern to be output and press the start key.
3. Press the system menu key.
4. Press the start key. A MIP-PG pattern is output.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display PG pattern to be output Purpose
GRAYSCALE To check the laser scanner unit
engine output characteristics
MONO1
(Output density: 0)
To check the drum quality
MONO4
(Output density: 70)
To check the drum quality
256-LEVEL To check resolution
reproducibility in printing
To Next Page
Loading...
