2KR/2KS
1-3-103
U931
Setting the automatic toner install
Description
Sets automatic toner installation on or off when power is turned on.
Purpose
Changed to off when deactivating automatic toner installation.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: OFF
3. Press the start key. The setting is set.
4. The machine automatically returns to the same status as when the power is turned on.
U935
Relay board maintenance
Description
Sets the mode when call for service (C0060) occurs.
Purpose
Sets the machine status temporarily when call for service (C0060) occurs. However, after the setting, call for
service (C0060) occurs again when progress of period.
Setting
1. Press the start key.
2. Select the item.
Initial setting: MODE0
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Supplement
After removing the cause of the problem, be sure to change the setting in OFF.
Maintenance
item No.
Description
Display Description
ON Automatic toner install function ON
OFF Automatic toner install function OFF
Display Description
MODE0 Setting mode: OFF
MODE1 Setting mode: ON (Usable up to three times of use)
To Next Page
Loading...
