2KR/2KS-1
1-3-59
U223
Operation panel lock
Description
Sets the operation panel lock function to ON or OFF.
Purpose
To restrict operation in the system menu on the operation panel.
Setting
1. Press the start key.
2. Select the item.
Initial setting: Unlock
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U224
Panel sheet extension
Description
Changes the image data and the message of the opening screen at the machine startup and the image data
and the message of the service call screen to user specified data.
Purpose
Set according to the preference of the user.
Setting
1. Write the image data or the message data to the USB memory.
2. Insert USB memory in USB memory slot of the machine.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the [Install] or [UnInstall].
7. Select the item.
8. Press the start key. Installation or uninstallation is started.
9. When normally completed, [COMPLETE] is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
Unlock Release the lock of the operation from the system menu.
Partial Lock Partially lock the operation from the system menu.
Lock Entirely lock the operation from the system menu.
Display Description
Install Installs the image data or the message data
UnInstall Restores the original image data or message data
Display Description
Opening Img Startup screen
Call Img Service call image
Call Msg Top Service call screen 1
Call Msg Detail Service call screen 2
To Next Page
Loading...
