2KR/2KS
1-3-90
U425
Setting the target
Description
Enters the lab values that is indicated on the back of the chart (P/N: 302FZ56990) used for adjustment. Also
enters the measurement value of the chart (P/N: 302AC68243) used for adjustment.
Purpose
Performs data input in order to correct for differences in originals during automatic adjustment.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [CCD]
1. Select the item to be set.
2. Select the item to be set.
3. Enters the value that is indicated on the back of the chart using the +/- or numeric keys.
4. Press the start key. The value is set.
Maintenance
item No.
Description
Display Description
CCD Entering the target values of the chart (P/N: 302FZ56990) used for
adjustment
DP Entering the measurement value of the chart (P/N: 302AC68243)
used for adjustment
CIS Execution is not required
Display Description
N875 Setting the N875 patch for the original for adjustment
N475 Setting the N475 patch for the original for adjustment
N125 Setting the N125 patch for the original for adjustment
CYAN Setting the cyan patch for the original for adjustment
MAGENTA Setting the magenta patch for the original for adjustment
YELLOW Setting the yellow patch for the original for adjustment
RED Setting the red patch for the original for adjustment
GREEN Setting the green patch for the original for adjustment
BLUE Setting the blue patch for the original for adjustment
ADJUST ORIGINAL Setting the main and auxiliary scanning directions
Display Description Setting range
L Setting the L value 0.0 to 100.0
A Setting the A value -200.0 to 200.0
B Setting the B value -200.0 to 200.0
To Next Page
Loading...
