2KR/2KS-1
1-4-3
Section Description Conditions Specified time
System 00
Initial JAM
The power is turned on when a sensor in the conveying
system is on.
-
04
Cover open
Cover is open during copying. -
05
Secondary paper feed
does not start
Secondary paper feed does not start within specified time
of arrival of paper at the registration section.
40 s
09
Sequence error jam
A communication sequence error occurs between the
machine and the 3000-sheet paper feeder.
-
Paper
feed
section
10
No paper feed from
cassette 1
Feed switch 1 (FSW1) does not turn on within the specified
time of paper feed clutch 1 (PFCL1) turning on; the clutch is
then successively turned off for 1 s and turned back on, but
the switch again fails to turn on within the specified time.
1152 ms
11
No paper feed from
cassette 2
Feed switch 2 (FSW2) does not turn on within the specified
time of paper feed clutch 2 (PFCL2) turning on; the clutch is
then successively turned off for 1 s and turned back on, but
the switch again fails to turn on within the specified time.
1209 ms
12
No paper feed from
cassette 3
Feed switch 3 (FSW3) does not turn on within the specified
time of PF paper feed clutch 1 (PFPFCL1) turning on; the
clutch is then successively turned off for 1 s and turned
back on, but the switch again fails to turn on within the
specified time (paper feed from paper feeder).
1209 ms
Feed switch 3 (FSW3) does not turn on within the specified
time of PF paper feed clutch 1 (PFPFCL1) turning on
(paper feed from 3000-sheet paper feeder).
780 ms
13
No paper feed from
cassette 4
The PF feed switch (PFFSW) does not turn on within the
specified time of PF paper feed clutch 2 (PFPFCL2) turning
on; the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time (paper feed from paper feeder).
1209 ms
14
No paper feed from MP
tray
The MP feed switch (MPFSW) does not turn on within the
specified time of the MP paper feed clutch (MPPFCL) turn-
ing on; the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
3913 ms
15
Jam in paper feeder
horizontal paper con-
veying section 1
Paper path sensor 3 (PPS3) does not turn on within speci-
fied time of PF paper feed clutch 2 (PFPFCL2) turning on
(paper feed from 3000-sheet paper feeder).
360 ms
16
Jam in paper feeder
horizontal paper con-
veying section 2
Paper path sensor 2 (PPS2) does not turn on within speci-
fied time of the paper path sensor 3 (PPS3) turning on
(paper feed from 3000-sheet paper feeder).
380 ms
17
Jam in paper feeder
horizontal paper con-
veying section 3
Paper path sensor 1 (PPS1) does not turn on within speci-
fied time of the paper path sensor 2 (PPS2) turning on
(paper feed from 3000-sheet paper feeder).
250 ms
To Next Page
Loading...
