2KR/2KS-2
1-4-11
Finisher 91
Finisher cover open
(3000-sheet document finisher)
The front cover, top cover or right sub tray is opened when
starting the finisher operation.
The centerfold unit top cover is opened when starting the
center-fold operation.
The mailbox cover is opened when starting the operation.
-
(Document finisher)
The finisher cover becomes open during paper is running.
Paper is remaining in paths at power on.
-
92
Eject paper sensor
non-arrival jam (docu-
ment finisher only)
In the straight mode, the eject paper sensor (EPS) is not
turned on even if a specified time has elapsed after the
paper entry sensor (PES) was turned on.
-
93
Reverse sensor jam
(document finisher
only)
The reverse sensor (SBS) does not turn on within specified
time of paper entry sensor (PES) turning on (unfinished
reversing canceled).
437 ms
The reverse sensor (SBS) is not turned on within specified
time (unfinished reversing set).
431 ms
The reverse sensor (SBS) is not turned off within specified
time its turning on (resident reversing canceled).
1826 ms
The reverse sensor (SBS) is not turned off within specified
time its turning on (resident reversing set).
700 ms
94
Paper entry sensor
stay/remaining jam
(document finisher
only)
The paper entry sensor (PES) is not turned off within speci-
fied time its turning on.
1370 ms
95
Paper conveying sen-
sor jam (document fin-
isher only)
The paper conveying sensor (PCS) is not turned off within
specified time its turning on (reversing canceled).
1370 ms
The paper conveying sensor (PCS) is not turned off within
specified time its turning on (reversing set).
656 ms
96
Jam between the built-
in finisher and machine
(built-in finisher only)
Paper ejection is not output from the machine to the docu-
ment finisher within specified time of the intermediate tray
sensor (ITS) turning on.
1217 ms
Section Description Conditions Specified time
To Next Page
Loading...
