Table 2-1. Machine Dimensions
ITEM SPECIFICATION
Overall Length 13 ft 5 in (4.08 m)
Overall Height 8 ft (2.6 m)
Overall Width (Hopper Wings In) 8 ft 6 in (2.6 m)
Overall Width (Hopper Wings Out) 10 ft (3 m)
Overall Weight
With Standard Screed: 17,720 lbs (8037.65 kg)
With HD Screed: 18,190 lbs (8250.84 kg)
Paving Width 8 - 15 ft (2.4 - 4.6 m)
Tunnel Area 5.5 sq ft (.51 m
2
)
Table 2-2. Engine Specications
ITEM SPECIFICATION
Manufacturer and Model Kubota, V3800-CR-TE4B (Tier 4 Final)
Engine Type Vertical Liquid Cooled Diesel, 4-Cylinder
Bore, Stroke and Displacement 3.9 in (100 mm); 4.72 in (120 mm); 2.30 cu in (3.8 L)
Power Rating 74 HP (55.2 kW)
Intake and Combustion Systems Turbo-Charged, Direct-Injection
Maximum Speed 2200 RPMs
Table 2-3. Performance Specications
ITEM SPECIFICATION
Travel Speed
0 - 290 feet per minute (FPM)
[0 - 88.4 meters per minute (MPM)].
Paving Speed 0 - 135 FPM [0 - 41.1 MPM]
Recommended Paving RPMs 1800 RPMs
Maximum Paving Depth 6 in (152 mm)
Table 2-4. Electrical Specications
ITEM SPECIFICATION
Battery 12 Vdc Maintenance Free, 12 Volts
Cold Cranking Amps (CCA) 1000 CCA
Alternator 12-Volt, Negative-Ground, 60 Amps
Starter Voltage and Type 12-Volt, Negative-Ground
Table 2-5. Lubricant Specications
ITEM SPECIFICATION
Engine Oil 15W-40, API, CH-4, CI-4
Hydraulic Oil All-Weather 32
Torque Hub 90 WT Gear Oil
Grease Shell Avania EP Grease or Equivalent
Chain Lube Chain Lube Agent
Table 2-6. Machine System Capacity Specications
ITEM SPECIFICATION
Engine Lubrication Oil (Rell Capacity) 15 qts (14.2 L)
Hydraulic Oil Tank 53 gal (151.4 L)
Torque Hubs 32 oz (.35 L) each
Diesel Fuel Tank 18.5 gal (70 L)
Spraydown Tank 7 gal (26 L)
Antifreeze Glycol-Based, Extended Life; 3.6 gal (13.8 L)
Table 2-7. Hydraulic Pressures Specications
ITEM SPECIFICATION
Drive 3625 psi (249.9 Bar)
Conveyors 3400 psi (234 Bar)
Auger 3400 psi (234 Bar)
Track Tensioning Relief 1500 psi (103.4 Bar)
Charge Pressure 350 - 400 psi (24 - 27.6 Bar)
2
LeeBoy 8510E Conveyor Paver
2-5
Information and Specications