LeeBoy 8608 - Page 27

Table 2-3. Performance Specications
ITEM SPECIFICATION
Engine Low Idle Speed
1300 RPMs
Engine Maximum Speed
2200 RPMs
Travel Speed
0 - 1.84 mph; 0 - 164 feet per minute (FPM)
Paving Speed
0 - 3.59 mph; 0 - 316 FPM
Recommended Paving RPMs
1900 RPMs / 2100 RPMs with generator on.
Maximum Paving Depth
6 in
Gradeability
20%
Table 2-4. Lubricant Specications
ITEM SPECIFICATION
Engine Oil 15W-40 API CJ-4
Hydraulic Oil All-Weather 32
Torque Hub 90 WT Gear Oil or Equivalent
Anti-Seize Lubricant Recommend using Zep Groovy (a can is shipped with your paver).
Grease Shell Avania EP Grease or Equivalent
Chain Lube Chain Lube Agent
Table 2-5. Machine System Capacity Specications
ITEM SPECIFICATION
Engine Lubrication Oil (Rell Capacity) 17 qt
Hydraulic Oil Tank 25 gal
DEF Tank 5 gal
Torque Hubs 32 oz each
Diesel Fuel Tank 32 gal
Spray Down Tank 7 gal
Coolant 3.25 gal. (Glycol-Based, Extended Life)
Table 2-6. Relief Pressure Specications
ITEM SPECIFICATION
Pump (Propulsion) 3625 psi
Cylinder Pump 2400 psi
Conveyor Pump 3400 psi
Auger Pump 3400 psi
Track Tensioning Relief 2400 psi
Charge Pressure 350 - 400 psi
Track Tension Pressure 900 psi
Park Brake Release 290 psi
Table 2-7. Hopper Specications
ITEM SPECIFICATION
Material Capacity
9 Tons
Height
31.75 in
Hopper Wings
Heavy duty; 1/2 in with large radius corners and rear hopper wing
wipers.
22
LeeBoy 8608 Commercial Paver
2-5
Information and Specications