LEGRAND PDU - Page 190

June 2018
190 Legrand PDU User Guide
Event/context Default message when the event =
TRUE
Default message when the event
= FALSE
Device > Firmware validation
failed
Firmware validation failed by user
'[USERNAME]' from host '[USERIP]'.
Device > Firmware update
started
Firmware upgrade started from version
'[OLDVERSION]' to version
'[VERSION]' by user '[USERNAME]'
from host '[USERIP]'.
Device > Firmware update
completed
Firmware upgraded successfully from
version '[OLDVERSION]' to version
'[VERSION]' by user '[USERNAME]'
from host '[USERIP]'.
Device > Firmware update
failed
Firmware upgrade failed from version
'[OLDVERSION]' to version
'[VERSION]' by user '[USERNAME]'
from host '[USERIP]'.
Device > Device identification
changed
Config parameter '[CONFIGPARAM]'
changed to '[CONFIGVALUE]' by user
'[USERNAME]' from host '[USERIP]'.
Device > Device settings saved Device settings saved by user
'[USERNAME]' from host '[USERIP]'.
Device > Device settings
restored
Device settings restored from host
'[USERIP]'.
Device > Data push failed Data push to URL [DATAPUSH_URL]
failed. [ERRORDESC].
Device > Event log cleared Event log cleared by user
'[USERNAME]' from host '[USERIP]'.
Device > Bulk configuration
saved
Bulk configuration saved by user
'[USERNAME]' from host '[USERIP]'.
Device > Bulk configuration
copied
Bulk configuration copied by user
'[USERNAME]' from host '[USERIP]'.
Device > Network interface link
state is up
The [IFNAME] network interface link is
now up.
The [IFNAME] network interface link
is now down.
Device > Peripheral Device
Firmware Update
Firmware update for peripheral device
[EXTSENSORSERIAL] from
[OLDVERSION] to [VERSION]
[SENSORSTATENAME].
Device > Sending SMTP
message failed
Sending SMTP message to
'[SMTPRECIPIENTS]' using server
'[SMTPSERVER]' failed.
[ERRORDESC].
Device > Sending SNMP inform
failed or no response
Sending SNMP inform to manager
[SNMPMANAGER]:[SNMPMANAGER
PORT] failed or no response.
[ERRORDESC].
Device > Sending Syslog
message failed
Sending Syslog message to server
[SYSLOGSERVER]:[SYSLOGPORT]
([SYSLOGTRANSPORTPROTO])
failed. [ERRORDESC].