LEGRAND PDU - Page 189

June 2018
Legrand PDU User Guide 189
Event types Radio buttons
Server monitoring
event
 Monitoring started: Legrand PDU takes the
action only when the monitoring of any
specified server starts.
 Monitoring stopped: Legrand PDU takes the
action only when the monitoring of any
specified server stops.
 Both: Legrand PDU takes the action when
the monitoring of any specified server starts
or stops.
Server reachability
 Unreachable: Legrand PDU takes the action
only when any specified server becomes
inaccessible.
 Reachable: Legrand PDU takes the action
only when any specified server becomes
accessible.
 Both: Legrand PDU takes the action when
any specified server becomes either
inaccessible or accessible.
Device connection
or disconnection,
such as a
USB-cascaded
slave device
 Connected: Legrand PDU takes the action
only when the selected device is physically
connected to it.
 Disconnected: Legrand PDU takes the
action only when the selected device is
physically disconnected from it.
 Both: Legrand PDU takes the action both
when the selected device is physically
connected to it and when it is disconnected.
Default Log Messages
These default log messages are recorded internally and emailed to specified recipients when Legrand PDU
events occur (are TRUE) or, in some cases, stop or become unavailable (are FALSE). See Send Email (on
page 200) to configure email messages.
Event/context Default message when the event =
TRUE
Default message when the event
= FALSE
Card Reader Management >
Card inserted
Card Reader with id
'[CARDREADERID]' connected.
Card Reader Management >
Card Reader attached
Card Reader with id
'[CARDREADERID]' disconnected.
Card Reader Management >
Card Reader detached
Card of type '[SMARTCARDTYPE]'
with ID '[SMARTCARDID]' inserted.
Card Reader Management >
Card removed
Card of type '[SMARTCARDTYPE]'
with ID '[SMARTCARDID]' removed.
Device > System started System started.
Device > System reset System reset performed by user
'[USERNAME]' from host '[USERIP]'.