LEGRAND PDU - Page 188

June 2018
188 Legrand PDU User Guide
Event types Radio buttons
State sensor state
change
Available radio buttons include
"Alarmed/Open/On," "No longer
alarmed/Closed/Off" and "Both."
 Alarmed/Open/On: Legrand PDU takes the
action only when the chosen sensor enters
the alarmed, open or on state.
 No longer alarmed/Closed/Off: Legrand PDU
takes the action only when the chosen
sensor returns to the normal, closed, or off
state.
 Both: Legrand PDU takes the action
whenever the chosen sensor switches its
state.
Sensor availability Available radio buttons include "Unavailable,"
"Available" and "Both."
 Unavailable: Legrand PDU takes the action
only when the chosen sensor is NOT
detected and becomes unavailable.
 Available: Legrand PDU takes the action
only when the chosen sensor is detected
and becomes available.
 Both: Legrand PDU takes the action both
when the chosen sensor becomes
unavailable or available.
Network interface
link state
 Link state is up: Legrand PDU takes the
action only when the network link state
changes from down to up.
 Link state is down: Legrand PDU takes the
action only when the network link state
changes from up to down.
 Both: Legrand PDU takes the action
whenever the network link state changes.
Function enabled or
disabled
 Enabled: Legrand PDU takes the action only
when the chosen function is enabled.
 Disabled: Legrand PDU takes the action only
when the chosen function is disabled.
 Both: Legrand PDU takes the action when
the chosen function is either enabled or
disabled.
Restricted service
agreement
 Accepted: Legrand PDU takes the action
only when the specified user accepts the
restricted service agreement.
 Declined: Legrand PDU takes the action only
when the specified user rejects the restricted
service agreement.
 Both: Legrand PDU takes the action both
when the specified user accepts or rejects
the restricted service agreement.