LEGRAND PDU - Page 192

June 2018
192 Legrand PDU User Guide
Event/context Default message when the event =
TRUE
Default message when the event
= FALSE
Peripheral Device Slot > * >
State Sensor/Actuator >
Unavailable
Peripheral device
'[EXTSENSORNAME]' in slot
'[EXTSENSORSLOT]' unavailable.
Peripheral device
'[EXTSENSORNAME]' in slot
'[EXTSENSORSLOT]' available.
Peripheral Device Slot > * >
State Sensor/Actuator >
Alarmed/Open/On
Peripheral device
'[EXTSENSORNAME]' in slot
[EXTSENSORSLOT] is
[SENSORSTATENAME].
Peripheral device
'[EXTSENSORNAME]' in slot
[EXTSENSORSLOT] is
[SENSORSTATENAME].
Inlet > * > Enabled Inlet '[INLET]' has been enabled by
user '[USERNAME]' from host
'[USERIP]'.
Inlet '[INLET]' has been disabled by
user '[USERNAME]' from host
'[USERIP]'.
Inlet > * > Sensor > * >
Unavailable
Sensor '[INLETSENSOR]' on inlet
'[INLET]' unavailable.
Sensor '[INLETSENSOR]' on inlet
'[INLET]' available.
Inlet > * > Sensor > * > Above
upper critical threshold
Sensor '[INLETSENSOR]' on inlet
'[INLET]' asserted 'above upper critical'
at [SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[INLETSENSOR]' on inlet
'[INLET]' deasserted 'above upper
critical' at [SENSORREADING]
[SENSORREADINGUNIT].
Inlet > * > Sensor > * > Above
upper warning threshold
Sensor '[INLETSENSOR]' on inlet
'[INLET]' asserted 'above upper
warning' at [SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[INLETSENSOR]' on inlet
'[INLET]' deasserted 'above upper
warning' at [SENSORREADING]
[SENSORREADINGUNIT].
Inlet > * > Sensor > * > Below
lower warning threshold
Sensor '[INLETSENSOR]' on inlet
'[INLET]' asserted 'below lower
warning' at [SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[INLETSENSOR]' on inlet
'[INLET]' deasserted 'below lower
warning' at [SENSORREADING]
[SENSORREADINGUNIT].
Inlet > * > Sensor > * > Below
lower critical threshold
Sensor '[INLETSENSOR]' on inlet
'[INLET]' asserted 'below lower critical'
at [SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[INLETSENSOR]' on inlet
'[INLET]' deasserted 'below lower
critical' at [SENSORREADING]
[SENSORREADINGUNIT].
Inlet > * > Sensor > * > Reset Sensor '[INLETSENSOR]' on inlet
'[INLET]' has been reset by user
'[USERNAME]' from host '[USERIP]'.
Inlet > * > Sensor > * > Normal Sensor '[INLETSENSOR]' on inlet
'[INLET]' entered normal state.
Sensor '[INLETSENSOR]' on inlet
'[INLET]' exited normal state.
Inlet > * > Sensor > * > Failed Sensor '[INLETSENSOR]' on inlet
'[INLET]' entered failed state.
Sensor '[INLETSENSOR]' on inlet
'[INLET]' entered normal state.
Inlet > * > Sensor > * > OK Sensor '[INLETSENSOR]' on inlet
'[INLET]' entered OK state.
Sensor '[INLETSENSOR]' on inlet
'[INLET]' exited OK state.
Inlet > * > Sensor > * > Warning Sensor '[INLETSENSOR]' on inlet
'[INLET]' entered warning state.
Sensor '[INLETSENSOR]' on inlet
'[INLET]' exited warning state.
Inlet > * > Sensor > * > Critical Sensor '[INLETSENSOR]' on inlet
'[INLET]' entered critical state.
Sensor '[INLETSENSOR]' on inlet
'[INLET]' exited critical state.
Inlet > * > Sensor > * >
Self-Test
Sensor '[INLETSENSOR]' on inlet
'[INLET]' started self test.
Sensor '[INLETSENSOR]' on inlet
'[INLET]' finished self test.
Inlet > Pole > * > Sensor >
Unavailable
Sensor '[PDUPOLESENSOR]' on pole
'[INLETPOLE]' of inlet '[INLET]'
unavailable.
Sensor '[PDUPOLESENSOR]' on
pole '[INLETPOLE]' of inlet '[INLET]'
available.