LEGRAND PDU - Page 194

June 2018
194 Legrand PDU User Guide
Event/context Default message when the event =
TRUE
Default message when the event
= FALSE
unavailable. available.
Overcurrent Protector > * >
Sensor > * > Above upper
critical threshold
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]' asserted
'above upper critical' at
[SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]'
deasserted 'above upper critical' at
[SENSORREADING]
[SENSORREADINGUNIT].
Overcurrent Protector > * >
Sensor > * > Above upper
warning threshold
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]' asserted
'above upper warning' at
[SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]'
deasserted 'above upper warning'
at [SENSORREADING]
[SENSORREADINGUNIT].
Overcurrent Protector > * >
Sensor > * > Below lower
warning threshold
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]' asserted
'below lower warning' at
[SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]'
deasserted 'below lower warning' at
[SENSORREADING]
[SENSORREADINGUNIT].
Overcurrent Protector > * >
Sensor > * > Below lower
critical threshold
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]' asserted
'below lower critical' at
[SENSORREADING]
[SENSORREADINGUNIT].
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]'
deasserted 'below lower critical' at
[SENSORREADING]
[SENSORREADINGUNIT].
Overcurrent Protector > * >
Sensor > Trip > Open/Close
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]' is open.
Sensor '[OCPSENSOR]' on
overcurrent protector '[OCP]' is
closed.
PDU > Controller > * >
Communication failed
Communication with controller
'[CONTROLLER]' (board ID
[BOARDID]) failed.
Communication with controller
'[CONTROLLER]' (board ID
[BOARDID]) restored.
PDU > Controller > * >
Firmware update
Controller '[CONTROLLER]' with board
ID [BOARDID] has started firmware
update
Controller '[CONTROLLER]' with
board ID [BOARDID] has completed
firmware update
PDU > Controller > * >
Incompatible
Controller '[CONTROLLER]' with board
ID [BOARDID] is incompatible.
Controller '[CONTROLLER]' with
board ID [BOARDID] is no longer
incompatible.
PDU > Controller > * > OK Controller '[CONTROLLER]' with board
ID [BOARDID] is OK.
Controller '[CONTROLLER]' with
board ID [BOARDID] is no longer
OK.
PDU > Load Shedding >
Started
PX placed in Load Shedding Mode by
user '[USERNAME]' from host
'[USERIP]'.
PX removed from Load Shedding
Mode by user '[USERNAME]' from
host '[USERIP]'.
Server Monitoring > * > Error Error monitoring server
'[MONITOREDHOST]': [ERRORDESC]
Server Monitoring > * >
Monitored
Server '[MONITOREDHOST]' is now
being monitored.
Server '[MONITOREDHOST]' is no
longer being monitored.
Server Monitoring > * >
Unreachable
Server '[MONITOREDHOST]' is
unreachable.
Server '[MONITOREDHOST]' is
reachable.