June 2018
Legrand PDU User Guide 197
Action Function
Record snapshots to
webcam storage
Makes a connected webcam start or stop
taking snapshots. See Record Snapshots to
Webcam Storage (on page 199).
Send email Emails a textual message. See Send Email
(on page 200).
Send sensor report Reports the readings or status of the selected
sensors, including internal or external sensors.
See Send Sensor Report (on page 201).
Send snapshots via
email
Emails the snapshots captured by a connected
Logitech
®
webcam (if available). See Send
Snapshots via Email (on page 202).
Send SNMP
notification
Sends SNMP traps or informs to one or
multiple SNMP destinations. See Send an
SNMP Notification (on page 202).
Start/stop Lua script If you are a developer who can create a Lua
script, you can upload it to the Legrand PDU,
and have the Legrand PDU automatically
perform or stop the script in response to an
event. See Start or Stop a Lua Script (on
page 204).
Switch outlets Switches on, off or cycles the power to the
specified outlet(s). See Switch Outlets (on
page 204).
Switch peripheral
actuator
Switches on or off the mechanism or system
connected to the specified actuator. See
Switch Peripheral Actuator (on page 205).
Syslog message Makes the Legrand PDU automatically forward
event messages to the specified syslog server.
See Syslog Message (on page 205).
4. Enter the information as needed and click Create.
5. Then you can assign the newly-created action to an event rule or schedule it. See Event Rules and
Actions (on page 184).
Alarm
The Alarm is an action that requires users to acknowledge an alert. This helps ensure that the user is aware
of the alert.
If the Alarm action has been included in a specific event rule and no one acknowledges that alert after it
occurs, the Legrand PDU resends or regenerates an alert notification regularly until the alert is
acknowledged or the maximum number of alert notifications is sent.
For information on acknowledging an alert, see Dashboard (on page 87).
Opera
tion:
1.
Choose Device Settings > Event Rules >
.
2. Select Alarm from the Action list.
3. In the Alarm Notifications list box, specify one or multiple ways to issue the alert notifications. Available
methods vary, depending on how many notification-based actions have been created. Notification-based
action types include:
To Next Page
Loading...
