LEGRAND PDU - Page 306

June 2018
306 Legrand PDU User Guide
Configuring DNS Parameters
Use the following commands to configure static DNS-related settings.
 Specify the primary DNS server:
config:# network dns firstServer <ip address>
 Specify the secondary DNS server:
config:# network dns secondServer <ip address>
 Specify the third DNS server:
config:# network dns thirdServer <ip address>
 Specify one or multiple optional DNS search suffixes:
config:# network dns searchSuffixes <suffix1>
-- OR --
config:# network dns searchSuffixes <suffix1>,<suffix2>,<suffix3>,...,<suffix6>
 Determine which IP address is used when the DNS server returns both IPv4 and IPv6 addresses:
config:# network dns resolverPreference <resolver>
Variables:
 <ip address> is the IP address of the DNS server.
 <suffix1>, <suffix2>, and the like are the DNS suffixes that automatically apply when searching for any
device via Legrand PDU. For example, <suffix1> can be raritan.com, and <suffix2> can be legrand.com.
You can specify up to 6 suffixes by separating them with commas.
 <resolver> is one of the options: preferV4 or preferV6.
Option Description
preferV4 Use the IPv4 addresses returned by the DNS
server.
preferV6 Use the IPv6 addresses returned by the DNS
server.
Setting LAN Interface Parameters
A LAN interface configuration command begins with network ethernet.