June 2018
330 Legrand PDU User Guide
Password Aging
This command enables or disables the password aging feature, which controls whether the password should
be changed at a regular interval:
config:# security loginLimits passwordAging <option>
Variables:
<option> is one of the options: enable or disable.
Option Description
enable Enables the password aging feature.
disable Disables the password aging feature.
Password Aging Interval
This command determines how often the password should be changed.
config:# security loginLimits passwordAgingInterval <value>
Variables:
<value> is a numeric value in days set for the password aging interval. The interval ranges from 7 to 365
days.
Idle Timeout
This command determines how long a user can remain idle before that user is forced to log out of the
Legrand PDU web interface or CLI.
config:# security loginLimits idleTimeout <value>
Variables:
<value> is a numeric value in minutes set for the idle timeout. The timeout ranges from 1 to 1440
minutes (24 hours).
User Blocking
There are different commands for changing different user blocking parameters. These commands begin with
security userBlocking.
You can combine multiple commands to modify the user blocking parameters at a time. See
Multi-Command Syntax (on page 381).
De
termine the
maximum number of failed logins before blocking a user:
To Next Page
Loading...
