LEGRAND PDU - Page 362

June 2018
362 Legrand PDU User Guide
config:# authentication radius add <host> <rds_type> <auth_port> <acct_port> <timeout>
<retries>
Variables:
 <host> is the IP address or host name of the Radius server.
 <rds_type> is one of the Radius authentication types: pap, chap, msChapV2.
Type Description
chap
CHAP
pap
PAP
msChapV2
MSCHAP v2
 <auth_port> is the authentication port number.
 <acct_port> is the accounting port number.
 <timeout> is the timeout value in seconds. It ranges between 1 to 10 seconds.
 <retries> is the number of retries. It ranges between 0 to 5.
 To enter the shared secret:
1. After executing the above Radius command, the system automatically prompts you to enter the shared
secret.
2. Type the secret and press Enter.
3. Re-type the same secret and press Enter.
 Example:
config:# authentication radius add 192.168.7.99 chap 1812 1813 10 3
Modifying an Existing Radius Server
You can modify one or multiple parameters of an existing Radius server, or change the priority or sequence
of existing servers in the server list.
 Change the IP address or host name:
config:# authentication radius modify <server_num> host <host>
 Change the Radius authentication type:
config:# authentication radius modify <server_num> authType <rds_type>
 Change the authentication port:
config:# authentication radius modify <server_num> authPort <auth_port>
 Change the accounting port:
config:# authentication radius modify <server_num> accountPort <acct_port>
 Change the timeout value:
config:# authentication radius modify <server_num> timeout <timeout>
 Change the number of retries: