LEGRAND PDU - Page 464

June 2018
464 Legrand PDU User Guide
Note: If your Legrand PDU uses PAP, then select "PAP."
10. Select Vendor Specific to the left of the dialog, and click Add. The Add Vendor Specific Attribute dialog
appears.
11. Select Custom in the Vendor field, and click Add. The Attribute Information dialog appears.
12. Click Add, and the Vendor-Specific Attribute Information dialog appears.
13. Click "Enter Vendor Code" and type 13742.
14. Select "Yes, it conforms" to indicate that the custom attribute conforms to the RADIUS Request For
Comment (RFC).
15. Click Configure Attribute, and then:
a. Type 26 in the "Vendor-assigned attribute number" field.
b. Select String in the "Attribute format" field.
c. Type Raritan:G{Admin User SystemTester} in the "Attribute value" field. In this example, three roles
'Admin,' 'User' and 'SystemTester' are specified inside the curved brackets {}.