LEGRAND PDU - Page 488

June 2018
488 Legrand PDU User Guide
To set Use this command
IPv4 or IPv6
third DNS
server
network dns thirdServer <ip
address>
<ip address> = DNS server's IP
address
 Commands for wireless networking:
 General wireless settings:
To set or
enable
Use this command
Wireless
interface
network wireless enabled
<option>
<option> = true, or false
SSID
network wireless SSID <ssid>
<ssid> = SSID string
BSSID
network wireless BSSID <bssid>
<bssid> = AP MAC address or none
802.11n
protocol
network wireless enableHT
<option>
<option> = true, or false
Authentication
method
network wireless authMethod
<method>
<method> = psk or eap
PSK
network wireless PSK <psk>
<psk> = PSK string
EAP outer
authentication
network wireless
eapOuterAuthentication
<outer_auth>
<outer_auth> = PEAP
EAP inner
authentication
network wireless
eapInnerAuthentication
<inner_auth>
<inner_auth> = MSCHAPv2
EAP identity
network wireless eapIdentity
<identity>
<identity> = your user name for EAP
authentication
EAP password
network wireless eapPassword
When prompted to enter the password
for EAP authentication, type the
password.