LEGRAND PDU - Advanced Features and Integration; Cascading with Raritan PX2-Based Products

The Legrand PDU can work with certain Raritan or third-party products to provide diverse power solutions.
In This Chapter
Cascading with Raritan PX2-Based Products ...................................... 496
Connection to Raritan Serial Access Produc
ts..................................... 496
Power IQ Configuration ........................................................................ 497
dcTrac
k ................................................................................................. 497
Cascading with Raritan PX2-Based Products
You can cascade Legrand PDUs only. See Cascading Multiple Legrand PDUs for Sharing Ethernet
Connectivity (on page 32).
However, you
can also cascade Legrand PDUs with Raritan's PX2-based products via USB or Ethernet ports.
These Raritan products include:
 PX2 series power distribution units (PDUs)
 PX3 series PDUs, including PX3-iX7
 EMX asset management devices
 PX3TS transfer switches, including PX3TS-iX7
 Branch Circuit Monitor 1 (BCM1)
 Branch Circuit Monitor 2 (BCM2), PMC and PMMC series, including:
 BCM2-iX7
 PMC-iX7
For detailed information on the cascading configuration and restrictions, refer to the Cascading Guide, which
is available from the Legrand PDU section of Raritan website's Support page
(http://www.raritan.com/support/).
Connection to Raritan Serial Access Products
Legrand PDU supports the integration with Raritan's serial access products - Dominion SX and Dominion SX
II.
You can access the CLI of the Legrand PDU via SX / SX II.
To only access the CLI of the Legrand PDU via SX / SX II, treat the Legrand PDU as a serial device by
connecting SX /SX II to the PDU's serial port labeled CONSOLE.
For more information on these Dominion serial access products, refer to:
 SX or SX II User Guide on the Support page (http://www.raritan.com/support/)
 SX or SX II Online Help on
the Product Online Help page
(http://ww
w.raritan.com/support/online-help/)
Integration