Lenovo System x3250 M4 - Page 65

Riser-card
assembly
Expansion slot 1
Expansion slot 2
Adapter
Adapter
Expansion-slot cover
Expansion-slot cover
Figure21.ServeRAIDadapterinstallation
Step3.Touchthestatic-protectivepackagethatcontainsthenewServeRAIDadaptertoanyunpainted
surfaceontheoutsideoftheserver;then,grasptheadapterbythetopedgeoruppercornersof
theadapterandremoveitfromthepackage.
Step4.TakethesignalcablethatisattachedtothedrivebackplaneandconnectittotheServeRAID
adapter.
•IfyouinstallaServeRAIDadapterinslot1onthePCIriser-cardassembly,routethesignalcable
fromthedrivebackplaneasshowninthefollowingillustration.
000000000000
SAS/SATA
signal cable
•IfyouinstallaServeRAID-M1050orServeRAID-M5014adapterinslot2onthePCIriser-card
assembly,routethesignalcablefromthedrivebackplanethroughthefancageholeonthe
leftoffan1asshowninthefollowingillustration.ConnectthesignalcabletoPort0onthe
ServeRAIDadapter.
Notes:
1.YoumustconnectthesignalcabletoPort0onaServeRAID-M1050orServeRAID-M5014
adapter.
Chapter2.Installingoptionaldevices51