–PowerRestorePolicy
Selectthischoicetosetthemodeofoperationafterthepowerlost.
–CommandsonUSBInterface
SelectthischoicetoenableordisabletheEthernetoverUSBinterfaceonIMM.Thedefaultis
Enable.
–NetworkConfiguration
Selectthischoicetoviewthesystemmanagementnetworkinterfaceport,theIMMMACaddress,
thecurrentIMMIPaddress,andhostname;definethestaticIMMIPaddress,subnetmask,and
gatewayaddress,specifywhethertousethestaticIPaddressorhaveDHCPassigntheIMM2IP
address,savethenetworkchanges,andresettheIMM.
–ResetIMMtoDefaults
SelectthischoicetovieworresetIMMtothedefaultsettings.
–ResetIMM
SelectthischoicetoresetIMM.
–Recovery
Selectthischoicetovieworchangethesystemrecoveryparameters.
–POSTAttempts
SelectthischoicetovieworchangethenumberofattemptstoPOST.
•POSTAttemptsLimit
SelectthischoicetovieworchangetheNxbootfailureparameters.
–SystemRecovery
Selectthischoicetovieworchangesystemrecoverysettings.
•POSTWatchdogTimer
SelectthischoicetovieworenablethePOSTwatchdogtimer.
•POSTWatchdogTimerValue
SelectthischoicetovieworsetthePOSTloaderwatchdogtimervalue.
•RebootSystemonNMI
Selectthischoicetoenableordisablerestartingthesystemwheneveranonmaskableinterrupt
(NMI)occurs.Enableisthedefault.
•HaltonSevereError
SelectthischoicetoenableordisablethesystemfrombootingintoOS,displayingthePOST
eventviewerwheneverasevereerrorwasdetected.Disableisthedefault.
–Storage
Selectthischoicetovieworchangethestoragedevicesettings.
–Network
Selectthischoicetovieworchangethenetworkdeviceoptions,suchasiSCSI.
–DriveHealth
Selectthischoicetoviewthestatusofthecontrollersinstalledinthebladeserver.
•DateandTime
Selectthischoicetosetthedateandtimeintheserver,in24-hourformat(hour:minute:second).
ThischoiceisonthefullSetuputilitymenuonly.
•StartOptions
Chapter3.Configurationinformationandinstructions67