Once registration is complete, a message is displayed and your profile is saved.
6 After registering your profile, register a device in order to identify the driver. To
continue with setup, touch [Continue].
You can also register a device at a later time.
7 Register a device on the driver setup screen. By registering a device to identify
the driver, your profile will be automatically loaded.
● You can register any desired device, such as a smart key or smartphone in your
profile.
● You can register multiple devices in your profile.
Related Links
Setting up how to identify a driver(P. 62)
Automatically loading a user profile
Taking a smart key or smartphone in the vehicle to identify the driver enables the
user profile to be automatically loaded.
●
The vehicle detects the device registered in the profile when the engine switch
<power switch> is turned to ACC or ON. When a registered device is detected,
the profile that the device is assigned to is automatically loaded.
● If the device registered in the profile is not detected, the vehicle is used in guest
driver mode.
● Touching [Settings] displays the driver settings screen enabling you to change
profiles.
● You can select a smart key or smartphone as the device to identify the driver.
INFORMATION
● If multiple devices registered in a profile are detected, the driver is identified based on
the information of the device detected first. If a highly trusted device is detected after
that, the detection result is updated and the profile changed.
● Of the Bluetooth
®
devices registered to a user profile, only the Bluetooth
®
device
of the most recent driver will be detected. Driver identification may be delayed or
may not be able to be performed before starting the vehicle depending on the usage
conditions of the Bluetooth
®
device. It is therefore recommended to register a smart
key in addition to Bluetooth
®
devices.
2-1. Multimedia system initial setup
55
2
Settings and registration
To Next Page
Loading...
