3. Installation and Wiring
3-2
3.1.6 Secure the installation space enough to protect the inverter against the overheating.
3.1.7 Special care should be taken in case the inverter is to be installed in the panel.
In case more than 2 inverters are to be installed or ventilation fan is to be installed in the panel, make
sure that inverter and ventilation fan is properly installed. If they are poorly installed, it causes the
increase of an ambient temperature and less effective ventilation. Therefore, be sure to keep the ambient
temperature of inverter below the allowable temperature.
3.1.8 Install the inverter tightly not to get loose using proper sized bolt or screw.
Min. 5 cm
Min. 10 cm
Min. 5cm
SV-iV5
Min. 10 cm
To Next Page
Loading...
Need help?
General
